Sunpal Commercial Hybrid Solar System 15Kw 20Kw 25Kw Photovoltaic System With Storage

Product Description

Product Description

Topcon Half Cut Solar Panel

Peak Power Watts: 580W
Maximum Power Voltage: 42.71V

Maximum Power Current: 13.58A

Open Circuit Voltage: 51.79V

Short Circuit Current: 14.29A
Size: 2279*1134*30mm

Weight: 31.5 kg

 

Hybrid Solar Inverter

100% unbalanced output, each phase;

 

AC couple to retrofit existing solar system;

 

Max. charging/discharging current of 100A;
High voltage battery, higher efficiency.

High Voltage LiFePo4 Battery

Quick Customization of Electricity;

Long cycle life 6000 cycles;

Safety first Smart BMS system;

Emergency-Backup and Off-Grid Functionality.

 

Monitoring System

Open station supports one-click installation and registration;

Problem support one-click dispatch and navigation;
Safe operation, traceable logs, etc;
Support full lifecycle data storage to ensure data security and reliability.

PV Tools

Wire Cable Cutter & Stripper;
MC3 MC4 Crimper;
MC4 Connectors Assembly;
Disassembly Tool.

Product Parameters

Model	SP-15KW200KWh	SP-20KW200KWh	SP-25KW200KWh
Battery Specification
Battery Type	Lithium-ion
Configuration	14 modules + 1 BPU
Rated capacity/voltage/energy	280Ah/716.8V/200.7kWh
Voltage range	627.2-795.2V
Rated charge/discharge	0.5C
AC Input/Output Data
Rated AC Input/Output Active Power (W)	15000	20000	25000
Rated AC Input/Output Current (A)	22.8/21.8	30.4/29	37.9/36.3
Max. AC Input/Output Current (A)	25/24	33.4/31.9	41.7/39.9
Max. Three-phase  Unbalanced Output Current (A)	30	35	41.7
Max. Continuous AC Passthrough Current (A)	80
Peak Power (Off Grid)	1.5 times of rated power, 10s
Power Factor Adjustment Range	0.8 leading to 0.8 lagging
Output Frequency and Voltage	50/60Hz; 3L/N/PE, 230/400Vac, 127V/220V, 277V/480V
Grid Type	Three Phase
Total Harmonics Current Distortion (THDi)	<3% (of nominal power)
DC Current Injection	<0.5% In
Battery Input Data
Max. Charging Current (A)	50
Max. Discharging Current (A)	50
Number of Battery Input	1
Charging Strategy for Li-Ion Battery	Self-adaption to BMS

Our Factory

Company Overview:

As a world-class solar products manufacturer, Sunpal specializes in the research, development, production, and sales of solar PV products and solar panels. Sunpal focused on research and manufacture of all-black solar panels since the year 1998, we have exported our various kinds of full-black solar panels to 86 countries and won a good reputation in quality. With over 10 years of development, Sunpal now has factory area covering 150,000 square meters, with 600 experienced employees.

 

Project Case

A commercial solar hybrid system is a grid connected commercial solar system with batteries.

A well designed commercial scale solar hybrid system can serve many useful purposes.

 

Peak lopping:

In commercial applications, it is common for the bulk of electricity charges to be based on the site's peak demand (shown as kVA on your electricity bill). A commercial solar system with batteries utilises an intelligent inverter charger to allow additional load capacity to come from the battery rather than the electricity grid. When demand reduces, the battery will be recharged ready for the next peak demand event. Peak demand charges can be significantly reduced with this type of system setup.

 

Battery backup:
Reliability of grid electricity is affected by many factors including road accidents and natural disasters, which can

have devastating effects. Not all solar hybrid systems can work during a grid outage. Our Solar Hybrid solution solves this issue by autonomously powering on through grid outages, without delay; you might not even notice there has been a grid outage! Your solar power will continue to be used by your loads and any excess sent to the batteries for later use. If you experience an extended outage, an optional Generator controller can be installed to control an Auto Start generator that will only start when the batteries are depleted.